Truck Bed Operation So Easy a Child Could Do It
If you’re looking for tailgate operation so smooth you could virtually use a single finger, then Dee Zee Tailgate assist is the choice for you. It allows easy operation, even when your hands are full, and avoid the bone-jarring “thud” from your tailgate slamming down.
This simple addition can extend the longevity of your tailgate and ensure the safety of operators, including children looking to lend a helping hand.
Our single dampened gas shock is extensively tested and works in conjunction with factory cables. All mounting hardware is included and no drilling is required for installation. Truck Tailgate Assist is designed specifically for each make and model, which makes installation a breeze.
Truck Tailgate Assist Features:
- Safely Controls The Drop Rate of Your Tailgate
- Designed Specifically for Each Make and Model
- Tested To Handle Heavy Daily Use
- Works In Conjunction With Factory Cables
- Easy, No Drill Installation with Simple Hand Tools
- All Hardware Included – Mounts to Driver’s Side
- Only One (1) Tailgate Assist Required per Vehicle
- 3-Year Warranty
AdminDeeZee (verified owner) –
No, you only need a single shock that will be installed on the driver’s side.
AdminDeeZee2 –
A DZ43102 will work if there is no factory installed assist.
AdminDeeZee2 –
That is only the early 2000’s that had that issue. All current model supercrews are fine.
AdminDeeZee2 –
There was a hybrid available that year so put that sub model in the listing. The DZ43100 fits both models.
AdminDeeZee2 –
The tailgate assist is only for the purpose of assisting the lowering. We do not have anything for lifting.
AdminDeeZee2 –
Contact customer service. 800-779-2102
AdminDeeZee2 –
Contact customer service.800-779-2102
AdminDeeZee2 –
DZ43301 will work on a 2017 Ram.
AdminDeeZee2 –
Get in contact with customer service. 800-779-2102
AdminDeeZee2 –
DZ43300 is the part number for a 2004 Ram.
AdminDeeZee2 –
Do not have an application for an Avalanche.
TAPSR –
Installs and works just like it reads and the YouTube videos that have been posted that I’ve watched, while I patiently waited for them to arrive. It took 15-20 each. Using them for a week now. Works great!!! (I did have to carefully, turn the bolt 1 1/2 to 2 more rotations JUST to make sure (like the instructions suggest if the bolt doesn’t get tight enough). I didn’t have a torque wrench, so they may be too tight, but they work great like I said. I found them on Amazon Prime. Thank you.
Gary Bumgardner –
I installed the assist cylinder in less then 30 minutes by using the easy to follow instruction guide… highly recommend this product.
AdminDeeZee2 –
Customer service can assist you with this. 800-779-2102
AdminDeeZee2 –
Get in contact with customer service. 800-779-2102
AdminDeeZee2 –
Call customer service for a replacement. 800-779-2102
AdminDeeZee2 –
We do not have one for an Avalanche. There is some plastic body parts that interfere with installation.
AdminDeeZee2 –
There are several videos on youtube. Contact customer service for more assistance. 800-779-2102
Richard Sherman –
2001 Dodge 2500 shows does not fit is that correct?
John –
Is there any tailgate assist that will fit a 95 F-250 or that can be modified to fit?
John –
Also, any options or models that would fit an 89GMC 2500?
Kyle Hicks –
Got a 2017 gmc sierra, what part number do I order?
Peyton Coleman, jr –
Installed it on my F150 and the nutset didnt work properly, can i order another?
Dee Engle –
How come I can’t buy a spare clip to keep the let down arm connected? This assist is now worthless. Please help, it’s been used a couple years but truck sits a lot. Thanks
Terry Bulaski –
Install a piece of cake. Ah, but one thing… The installer placed the shock in up side down.. Did not want to break it pulling it off… Is there an issue with this topsy turvey install or
Can it be flipped over with damage? Thank you.
AdminDeeZee2 –
That is correct. First year of fitment is 2003.
AdminDeeZee2 –
It will only work if the factory installed one is not functioning any longer.
AdminDeeZee2 –
Get in contact with customer service. 800-779-2102
AdminDeeZee2 –
Do not have any information of which would fit.
AdminDeeZee2 –
It is very easy to install.
Linda Coleman –
How many of the tailgate assits do you put on one tailgate. Is one tailgate assit all that is needed?
AdminDeeZee2 –
First year of fitment we have is 2003. Not sure what the exact difference is but there is one that doesn’t allow the tailgate assist to mount and work properly.
AdminDeeZee2 –
There was a change to the installation to allow DZ43102 to fit a larger range of years. We have not had the DZ43101 for some time and not sure the difference any longer.
AdminDeeZee2 –
One on the drivers side is all that is needed.
Darrell –
Why does just not fit a 2017 ram
Tyler Davis –
The product seems to be working well. Installation was a bit tricky, needed to apply the adhesive to help the screw catch. I bought on Amazon and deezee sent me replacement parts directly without any hassle when I messed up the self locking hardware. Fantastic service and a great product, too!
R M Bell –
2004 GMC SONOMA ??
Arthur Muhlig –
It shouldn’t be that difficult to install this myself. ?
AdminDeeZee2 –
DZ43301 would be the correct application part number for a 2017 Ram.
AdminDeeZee2 –
Do not have one for a 2004 Sonoma.
AdminDeeZee2 –
It will only work if the truck does not have the factory installed one.
AdminDeeZee2 –
Contact customer service for assistance.
AdminDeeZee2 –
Do not know the size of each ball mount but they are not all exactly the same.
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
At this time there is no plans to have one for a Colorado.
Holly stebbins –
Can I buy just the nut part that goes into the tailgate itself and the tool to install it. I installed this and apparently did not get it tight enough now the bolt comes right out
Nick Jarrell –
This tailgate assist absolutely works as advertised. I’m completely happy with the way it works and installation was a snap. I only had 1 issue with the installation. The instructions say to turn the nut on the Blind Nut tool at least 9 turns. I only got 7 turns then the nut on the tool galled up and I couldn’t turn it any more. I had to go to a hardware store to buy another nut and bolt to finish the installation of the Blind Nut. To insure that it didn’t gall up again, I put a small dab of grease about half way up the bolt of the new blind nut tool. Be careful not to get grease on the end of the bolt so the lock tight will lock the threads of the ball mount. Other than this little issue, I still give the tailgate assist 5 stars because it works great.
C FRITZ –
DO YOU A TAILGATE ASSIST TO LIFT TAILGATEC FRITZ
Levochkin Anatolii –
Hey guys. Got deezee gate assist for 2017 ram, but box was open by some idiots at front desk and I didnt find that hex screw and nuts. I thied home depot, but they dont have same pitch screws. Can I order it from you directly?
CWix –
2004 Ram 2500?
Frank Jones –
Easy to install great product. The addition of a lock down sleeve on the damper would be even better as it would stop tailgate bounce when
operating with gate down.
Tom –
Will this fit a 2013 Avalanche? If not what part number would?
AdminDeeZee2 –
Yes we have install kits for them. Call customer service for assistance. 800-779-2102
AdminDeeZee2 –
Call customer service for assistance. 800-779-2102
AdminDeeZee2 –
We are not aware of any place to get just that part. Call customer service for assistance. 800-779-2102
AdminDeeZee2 –
We do not have a tailgate assist for a 95 F250. Do not have any information on retro fitting any of the kits.
AdminDeeZee2 –
As long as the truck does not have a factory one installed that could hinder the tailgate assist from properly working.
AdminDeeZee2 –
DZ43203 will work with the step tailgates. The rate of travel on this tailgate will be a little faster due to the extra weight. It will function as intended.
AdminDeeZee2 –
A DZ43301 would be the part number for a 2017 Dodge Ram.
AdminDeeZee2 –
As long as the mounting points for our assist are available to be used and the factory one does not interfere, it should mount fine. Review the instructions for DZ43102 to see the mounting locations.
AdminDeeZee2 –
Get in touch with customer service for assistance on this piece. 800-779-2102
AdminDeeZee2 –
We do not have a Tailgate Assist for the Avalanche.
AdminDeeZee2 –
The tailgate assist is for assisting in lower the tailgate not for closing.
AdminDeeZee2 –
Yes. Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
Get in contact with our customer service and they will be able to assist you. 800-779-2102
AdminDeeZee2 –
We do not have one for an Avalanche
AdminDeeZee2 –
We don’t have one for an Escalade.
AdminDeeZee2 –
On the backside of the shock end is a spot you can put a flat head screwdriver under and carefully pry it up enough to release it from the ball mount.
Cody Daniels –
I got rear ended recently and had to replace my rear tailgate. The customer service team sent me out a new bolt kit free of charge. The hydraulic lift itself is awesome and should be included on every RAM! I would highly recommend this item and company.
AdminDeeZee2 –
Call customer service for assistance on getting the correct one and set up the return. 800-779-2102
AdminDeeZee2 –
That would be used to install the ball mount on some applications.
AdminDeeZee2 –
What normally happens as the tailgate assist is working on the passenger side it will try to lift the tailgate out of the slot as you would remove the tailgate. I am not sure with one on each side would keep this from happening.
AdminDeeZee2 –
Do not have one for a 97 F350.
AdminDeeZee2 –
On the backside of the head of the shock is a flat area that a flat head screwdriver can be placed under. Carefully pry and this will expand the the arms that hold the shock to the ball mount.
AdminDeeZee2 –
Depends on which vehicle it is for. They are not all the same length.
AdminDeeZee2 –
Contact customer service for assistance in replacement parts. 800-779-2102
AdminDeeZee2 –
It is possible the shock could be weak. But with the step tailgate it will move a little faster than a tailgate without the step. You can call customer service for more information. 800-779-2102
AdminDeeZee2 –
Contact our customer service and they will assist you in how to remove and send you the replacement parts. 800-779-2102
AdminDeeZee2 –
There should not be anything on this model to interfere with the installation. DZ43301 should work. Verify with the instructions and the location on the vehicle to make sure there is nothing in the way.
AdminDeeZee2 –
Do not have one for the Avalanche and the Silverado application will not work.
James –
So nice to have something that works perfectly with great instructions and photos! No pidgin English translation from chinese as we’ve come to expect. Installed on 2016 F-150. Tailgate slowly lowers hands off as promised. Where I really needed this over the last 16 years was on my 2001 F-150. The tailgate on that rig was twice as heavy as the one on my 2016.
Evan B –
I lost the metal clip to keep the arm connected and Dee Zee shipped me a new one plus 2 spares in case I need them in the future. Great product and great customer service!
AdminDeeZee2 –
Fill out the contact us form from our website (https://www.deezee.com/support/) and attach the photos you have and our customer service department will work with to resolve this defect.
AdminDeeZee2 –
Do not have one to fit back that far.
AdminDeeZee2 –
In the upper left corner of our main page is where you can get instructions. Click on that link and then enter your part number.
AdminDeeZee2 –
On the backside of the shock head is a flat spot that a flat head screw driver can be placed under. Carefully pry the metal clip up and it will release the head of the shock from the ball mount.
Jose –
Have install on my Ram 1500 2018 the problem I have is that head of the shock connect to the truck it rubs on the tail gate I can send pictures if you like
AdminDeeZee2 –
DZ43102 is the application number.
AdminDeeZee2 –
Call customer service for assistance on getting a new one. 800-779-2102
AdminDeeZee2 –
Not sure which clip you are referring to. Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
You can remove the shock. On the backside of the head of the shock is a flat spot for a screwdriver. Place it under the metal and carefully pry. This will spread the clip and allow the shock to be removed. It will not work properly installed upside down.
AdminDeeZee2 –
It will not work on a flareside. The mounting locations are not there on those trucks.
AdminDeeZee2 –
Place the following address in your browser and it will take you to our shipping and returns information. https://www.deezee.com/shipping-returns/
AdminDeeZee2 –
We do not have a tailgate assist for the Avalanche.
AdminDeeZee2 –
Replacement parts are available. Contact customer service. 800-779-2102
AdminDeeZee2 –
DZ43102 fits a 07-18 Chevy/GMC.
AdminDeeZee2 –
We do not have one for a 96 F150
AdminDeeZee2 –
Give a call to customer service for assistance. 800-779-2102
AdminDeeZee2 –
Go to our contact us page to attach photos for customer service to review and get in contact with you. The follow web address will get to the contact page https://www.deezee.com/faqs/.
AdminDeeZee2 –
We do not have the tailgate assist cylinders available by themselves.
AdminDeeZee2 –
It will not. Those beds are considered the flareside and the mounting hole is not there on the tailgate.
AdminDeeZee2 –
The information from GM was that trucks above the WT trim had a factory tailgate assist from the factory. We did find that not of them were getting this option. If the truck does not have the factory assist ours will fit on the truck.
David W (verified owner) –
10 minute install. Took longer hunting tools than the install. Fits perfectly and works as advertised. Awesome product!!!!
Don’t have to worry about telling someone to “drop the gate” then wincing .
AdminDeeZee2 –
No. We have seen them installed on trucks for more than 8 years and shown no rust.
AdminDeeZee2 –
You can call customer service and discuss the issue you are having to see what can be done. 800-779-2102
AdminDeeZee2 –
Get in contact with customer service. 800-779-2102
Ralph Crane –
Simple install on my F350, great product for keeping the tailgate from slamming down, especially when my hands are full. Wouldn’t want my tailgate without one of these. Also, through my own fault, I had a parts problem, called Dee Zee support and they were excellent in providing a solution. I wouldn’t hesitate to buy another tailgate assist (already my second due to truck upgrade..)
AdminDeeZee2 –
Yes the assist will work. Be sure to install the nutsert to front part of the oval hole when the tailgate is down.
AdminDeeZee2 –
DZ43301 is the part number for your application.
AdminDeeZee2 –
Yes it will.
AdminDeeZee2 –
Give a call to our customer service for assistance. 800-779-2102
AdminDeeZee2 –
There is nothing to prevent it from being installed if the hole is there. It will not work properly because the hinge point on the passenger side is where you have the slot to remove the tailgate. When the tailgate assist is installed on that side the tailgate gets to that slot it will try to come out causing the tailgate to bind and stop.
Paul K –
Took about 10 minutes to install and works flawlessly. No more getting smacked by a dropped tailgate. I don’t understand why the manufactures don’t put these on….they work that good!
AdminDeeZee2 –
It would be installed on the drivers side and the super duty trucks have a oval hole and that would be the one to use.
AdminDeeZee2 –
Yes.
AdminDeeZee2 –
We do not have tailgate assist for an El Camino.
AdminDeeZee2 –
We do not have an one to fit the 4 door model trucks. The installation hole is not there in the tailgate. Get in contact with the place of purchase for a return.
AdminDeeZee2 –
It does not work on the vehicle without modifications to the vehicle. We do not know what is need to make it work. We have seen some say there is cutting something on the vehicle to make it work.
AdminDeeZee2 –
The tailgate assist would have to be disconnected for the tailgate to be removed. There is a flat area on the backside of the head that a flat head screwdriver can be put under and carefully lift. This will spread the clip enough to pop the shock off the ball mount.
AdminDeeZee2 –
It will work if the truck does not have the factory assist on it. From the information that we had received was that the WT trim was the only one that didn’t have the factory version.
AdminDeeZee2 –
Call customer service to get a replacement. 800-779-2102
AdminDeeZee2 –
Unfortunately we missed getting the model listed. It will work and we will get the Power Wagon sub model listed.
AdminDeeZee2 –
The issue for the passenger side is the slot that allows the tailgate to be removed. When tailgate assist is installed and in use it wants to pull the tailgate out of the slot and causes the tailgate to get bound up.
AdminDeeZee2 –
There is no adjustment to increase or decrease the speed of the shock.
AdminDeeZee2 –
There is no hole in the tailgate for attachment.
AdminDeeZee2 –
There is unfortunately not another product to use. The SuperCrews for some reason don’t have the hole needed for installation. Not sure why Ford made them different from the regular and supercab trucks. We do give all information to sellers of our products these types of notes but we can’t control how they make these notations.
AdminDeeZee2 –
It does not assist in closing.
AdminDeeZee2 –
They do not fit the Avalanche.
AdminDeeZee2 –
Do not have one for that year of truck.
AdminDeeZee2 –
Yes it will.
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
Do not have one for the Tacoma.
AdminDeeZee2 –
Contact customer service and they will be able to get a replacement. 800-779-2102
AdminDeeZee2 –
“Work Truck” is what WT stands for.
Dave Smith –
great product…excellant video instructional….I did it…thanks so very much
AdminDeeZee2 –
Not aware of any fitment issues on a Laramie model. DZ43301 is the correct part number
AdminDeeZee2 –
Be sure to get in contact with Amazon to get it returned.
Damon J. –
I installed this on my 2002 F-150 around four years ago and it still works like it was brand new. Best $32 you can spend. Takes all the hassle out of the older bodystyle tailgates that felt like they would slam loose if you accidentally let it go. Good job, DeeZee!
AdminDeeZee2 –
Do not have one for a Sport Trac.
AdminDeeZee2 –
Yes there is a difference. We do have to different part numbers. The installation is similar but there is a slight difference in the bracket on the tailgate.
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
We don’t have the necessary information needed to make a tailgate assist fit an older model trucks. Not sure if we have a shock the proper length for that vehicle.
AdminDeeZee2 –
If it is not working when installed. Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
DZ43102 will be the part number for 2012 GM.
AdminDeeZee2 –
Do not have an application number for a Toyota Tundra.
Chris Houser –
First off, I would like to say that Dee Zee’s website says the tailgate Assist will not fit my 2017 GMC Sierra 2500HD. Amazon on the other hand says that it will. So I decided to try it as my truck didn’t come with the factory assist. As I started to try and install the blind nut with the tool supplied with the kit it repeatedly spun as a lot of others have also commented. So I put thread locker on it and let it sit overnight. Tonight I tried to install it again and it worked perfectly. I installed the rest of the assist on my truck. I am very happy with this item so far. Just have to see how long it lasts. The DZ43102 did fit my truck without any interference. I would definitely recommend this product. The tailgate dropped very slowly each and every time .
AdminDeeZee2 –
Do not have one that goes back to 1997.
Scott –
Just installed in about 20 minutes. Everything fit well and instructions were very clear (which was nice for a change!). I had the tailgate slammed down so many times when someone else would open it. It is very, very heavy. Now it just eases on down nice and slow.
AdminDeeZee2 –
DZ43301 will work. There is no difference in the tailgate area.
AdminDeeZee2 –
Unfortunately we do not know what would be need to make it work on a 91 Dodge.
AdminDeeZee2 –
Do not have an application to fit an Avalanche.
AdminDeeZee2 –
On the backside of the socket head is a flat spot that a flat head screwdriver can be put under and carefully pry up to spread the clip holding it on the ball.
AdminDeeZee2 –
They go back to 99 for fitment.
AdminDeeZee2 –
You would definitely need the DZ43204 for a 17 F150. DZ43200 only works up to 14.
AdminDeeZee2 –
No. The tailgates are different than the standard beds.
AdminDeeZee2 –
Do not have a model for the Avalanche.
AdminDeeZee2 –
Put the following address in your browser and it will take you to the replacement part of our site. https://www.deezee.com/product-category/replacement-parts/
AdminDeeZee2 –
Not sure what vehicle you are referring to but on Ford F150 from 97-03 the flareside and supercrew tailgates had different tailgates and the mounting hole was not there. On 04-14 flareside it was the same issue.
AdminDeeZee2 –
Do not have one for the frontier.
AdminDeeZee2 –
DZ43301.
AdminDeeZee2 –
We do not have a tailgate assist for a ranger.
AdminDeeZee2 –
We do not have the insert by itself. You can order a complete install kit from our site. Place the following link in your web browser and you will see the kits https://www.deezee.com/product/tailgate-assist-hardware-kit/. You will need the kit for DZ43301.
AdminDeeZee2 –
It will work only if the factory lift is not on the vehicle.
AdminDeeZee2 –
We do not offer one for an Escalade.
AdminDeeZee2 –
Yes. The travel speed is a little faster because of the added weight of the step.
AdminDeeZee2 –
It is designed for assisting when opening only.
AdminDeeZee2 –
DZ43100 is the part number for a 2005 Chevy.
AdminDeeZee2 –
I am not sure how the GM one is installed. Review our instructions for DZ43102 for mounting locations to make sure they are there for use or after factory unit is removed ours will mount.
AdminDeeZee2 –
We do not have a tailgate assist for the vehicle.
AdminDeeZee2 –
At this time there is not plans to produce one.
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
For this truck it uses the hole for installation. Part number DZ43200 is what you would need and look at the instructions to see how it uses the hole for mounting.
Nathan D –
I have a 2006 silverado that i installed this on. It worked almost perfectly accept the one nut would scrape the tailgate. I filed it down and now its perfect. Other than that minor issue I was very impressed! The instructions were extremely clear and easy to follow. Very impressed.
AdminDeeZee2 –
DZ43300 is for a 02-08 Ram 1500. DZ43301 is for a 09-18 Ram 1500. Not sure why it is coming up with Chevy for a DZ43301.
AdminDeeZee2 –
DZ43301 is for a 18 Ram 1500.
AdminDeeZee2 –
Get in contact with customer service for assistance. 800-779-2102
AdminDeeZee2 –
We don’t have just the blind nut available alone. The complete install kit is available under the replacement section of our website. For further assistance you can contact customer service. 800-779-2102
AdminDeeZee2 –
You can order a replacement install kit on our website under replacement parts.
AdminDeeZee2 –
There may be a problem inside the cylinder. Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
DZ43300 will fit on an 04 Ram.
AdminDeeZee2 –
We use metal ball mounts for our shocks on toolboxes.
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
Do not have one for the Colorado.
AdminDeeZee2 –
Unfortunately there isn’t a different shock to use. Please get in touch with customer service again for assistance.
AdminDeeZee2 –
You can get a replacement install kit. The rivnut should be installed in the hole closest to the front of the truck when the tailgate is down. Here is the where you can find replacement kits. https://www.deezee.com/product/tailgate-assist-hardware-kit/
AdminDeeZee2 –
Call customer service for assistance. 800-779-2102
AdminDeeZee2 –
Do not have that information. This product comes to us prepackaged. Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
We do not have an application part number for a 98 C1500.
AdminDeeZee2 –
You can either order a replacement on our website or contact customer service. 800-779-2102.
AdminDeeZee2 –
Do not have an application for the Colorado.
AdminDeeZee2 –
Do not have one for that truck.
AdminDeeZee2 –
DZ43200 will work on the Raptor.
AdminDeeZee2 –
DZ43301.
AdminDeeZee2 –
Yes it does fit that vehicle.
AdminDeeZee2 –
Contact customer service and they will be able to get that sent to you. 800-779-2102
AdminDeeZee2 –
Unfortunately we do not have one for that year. First year application for a 2500 Ram is 2003.
AdminDeeZee2 –
DZ43102 is the model number for a 2014 GMC. I am not sure how the factory one is installed. I suggest reviewing the instructions.
AdminDeeZee2 –
We do not have one for a Sport Trac.
AdminDeeZee2 –
DZ43102 is for a 18 Chevy but you will need to clarify there is not a factory one installed on the truck. We are not sure they will work together.
AdminDeeZee2 –
DZ43301 will fit on a 2018 Ram.
AdminDeeZee2 –
Get in touch with our customer service for assistance on this issue. 800-779-2102
AdminDeeZee2 –
We do not have one for the flareside trucks. The mounting locations are not there for installation.
AdminDeeZee2 –
Tailgate assists have a three year warranty. If you need more detailed information call customer service. 800-779-2102
AdminDeeZee2 –
Contact customer service for assistance in getting the necessary parts. 800-779-2102
Al –
After watching a few videos on YouTube about this product I went out and bought one for my truck. EXCELLENT is all I have to say…. WOW what a difference it makes when opening the tailgate… no more banging …… If any one is in doubt don’t be buy one you won’t be disappointed….
AdminDeeZee2 –
Contact customer service for assistance on the warranty. 800-779-2102
Gary –
I installed a DeeZee on my 2013 Ram 2500 in 2014. 125,000 miles later, it was still fine. I just bought a 2020 Ram 3500 and ordered the DeeZee tailgate damper for it. The only question was where to buy one. I like it. Everytime I open someone else tailgate I realize how used to mine I am because of the loud *BANG* as I drop their tailgate.
I have to laugh at the instructions for installion. Appearantly , many non-mechanic types are installing these. Installation is easy and straight forward.
Thanks for a product that works well for many years of use.
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
The tailgate assist will work with the trucks that have the step. It will travel down a little faster because of the extra weight but will still function fine.
AdminDeeZee2 –
We currently do not offer one for the Frontier.
AdminDeeZee2 –
The tailgate assist will not fit a supercrew in 2003. The hole for mounting the shock to the tailgate is not there on the supercrew tailgates.
AdminDeeZee2 –
The DZ43105 will fit a Colorado starting in 2015.
AdminDeeZee2 –
On the passenger side is where the slot is for the tailgate to be removed. When installed there the tailgate will begin to fall and then when it reaches that spot will try to pull the tailgate out of the slot and bind the tailgate as it is falling.
AdminDeeZee2 –
You could go with out the washer. Or if you can find a smaller thinner washer with the same center size will work also.
AdminDeeZee2 –
Do not have available. The tailgate is missing the mounting hole.
AdminDeeZee2 –
Yes it will.
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102
Corey (verified owner) –
Works great. My teenage son was able to install in minutes. There is no reason not to add this to your truck.
Roger Toth (verified owner) –
Excellent quality, very reasonable price, easy install, excellent design. Easy ordering online and quick shipping! I was waiting for this to become available for my vehicle, it was the only thing missing. Thanks for a great product!
AdminDeeZee2 –
DZ43101 is no longer available. It is converted to the DZ43102 which will not work on an Avalanche.
Josh Huitt –
This product fits extremely well on a 2015 ram and works just as good as the factory slow tailgate feature. This is super easy to install there’s instructions in the packet also there are support videos available super easy and very handy definitely helps when you have your hands full and you don’t want your tailgate to slam down highly recommended!!!!
bob Lightfoot –
I’ve had a Ford F150 for 7 years with one of these tailgate assists on it.. Got my new Ford truck less than a week ago and i’ve already installed one of these on it. I’m retired and an old fart, so this is really handy for me,
Bill Delaney –
AWESOME!
Installing on my second Dodge truck
Rudedog –
I’ve owned this tailgate assist for over 4 years and haven’t had any problems. A little difficult to install but doable.
AdminDeeZee2 –
No. We unfortunately do not have one for the Dakota.
AdminDeeZee2 –
It will work with the RAM box. For the bed extender, you will have to make sure the attachment point at the top does not interfere with the extender attachment point.
AdminDeeZee2 –
Unfortunately we do not ship outside the US direct. There are dealers that do.
AdminDeeZee2 –
That is dependent on the application. Some do and others don’t.
AdminDeeZee2 –
No. It is designed to assist when lowering.
AdminDeeZee2 –
Contact customer service. They will be able to send you one. 800-779-2102
AdminDeeZee2 –
We do not offer a lift assist.
AdminDeeZee2 –
Not sure where the noise of the shock would be coming from. There is no real way to lubricate the shock. Get in contact with our customer service. It may have another issue that it needs replaced. 800-779-2102
AdminDeeZee2 –
We currently do not offer a Tailgate assist for the Tundra.
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
From the information we have received on this multipro tailgate is that they come with a factory assist. Not sure if ours would work properly in conjunction with the factory.
AdminDeeZee2 –
I believe the clip is available. Please contact customer service for verification and to order. 800-779-2102
AdminDeeZee2 –
Yes. get in contact with our customer service. 800-779-2102
AdminDeeZee2 –
Only need one to be installed on the drivers side of the vehicle.
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
Yes. The DZ43204 will carry over to the 2020 F150.
AdminDeeZee2 –
Yes it will. DZ43102 fits 07-18.
AdminDeeZee2 –
DZ43301 will fit the 19 2500 models.
AdminDeeZee2 –
We are in the process of having one available March of 2020.
AdminDeeZee2 –
If the vehicle does not have the factory installed unit.
AdminDeeZee2 –
Yes. DZ43200 will fit the Raptor edition.
AdminDeeZee2 –
19 RAM Classic will use DZ43301.
AdminDeeZee2 –
No. DZ43204 is for 15-20 F150. DZ43200 is for 04-14 F150.
AdminDeeZee2 –
Get in contact with customer service for help with this issue. 800-779-2102
AdminDeeZee2 –
Contact customer service for assistance on missing parts. 800-779-2102
AdminDeeZee2 –
If there is not a factory assist already on the truck the tailgate assist should fit.
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
DZ43301 will fit on the classic RAM.
Steve browner –
This thing works great
AdminDeeZee2 –
Contact customer service for assistance on this issue. 800-779-2102
Jock Taylor –
Great product and I got mine early for $19.00.
AdminDeeZee2 –
Contact customer service to get the part. 800-779-2102
AdminDeeZee2 –
We do not have a tailgate assist for the Avalanche. There is plastic pieces where installation is that will not allow for fitment.
AdminDeeZee2 –
We do have replacement parts. Contact customer service. 800-779-2102
AdminDeeZee2 –
Contact our customer service for assistance. 800-779-2102
AdminDeeZee2 –
Unfortunately we do not go back to 98 for a tailgate assist.
AdminDeeZee2 –
We do not offer one for an Avalanche.
AdminDeeZee2 –
You will need just one tailgate assist.
AdminDeeZee2 –
DZ43103 is for the 19+ GM trucks. But the multipro tailgates do come with an assist built in. Ours will not work in conjunction with it.
AdminDeeZee2 –
It will be available for the Ranger March of 2020.
AdminDeeZee2 –
We do not offer a tailgate assist for the Avalanche.
AdminDeeZee2 –
The only way to retrieve the part inside the tailgate is to remove the inner panel of the tailgate.
Mike –
Just a few minutes install and no more dropped tailgate. Ford should install this on all their tailgates!
Rick –
Had good instructions and everything went very well. This really slows down the drop speed on a heavy tailgate. Good engineering and easy to do.
Tony –
Very easy to install . Less than 30 minutes in below 0 temps, out in the driveway. Works great just as described. Worth every penny !
AdminDeeZee2 –
The max weight is the tailgate.
AdminDeeZee2 –
The price is $35.95 each plus s/h. Shipping is calculated in the cart.
AdminDeeZee2 –
Unfortunately we do not go back to a 97 application.
AdminDeeZee2 –
DZ43105 will carry over fitment to the 2021 Colorado.
AdminDeeZee2 –
Yes. Get in touch with our Customer service. 800-779-2102
AdminDeeZee2 –
You will need to contact customer service for this request. 800-779-2102
AdminDeeZee2 –
DZ43301 would be for a 1500 classic. If the truck is a new RAM it will be DZ43302.
AdminDeeZee2 –
We do not recommend installing one on the passenger side. This is where the tailgate hinge is slotted so it can be removed. When installed the tailgate will come down and will get pulled out of the slot and bind up the hinge.
AdminDeeZee2 –
Have not run into this situation on this truck. Get in touch with customer service for some assistance. 800-779-2102.
Johnny –
My installation only took a few minutes. I think the new version make it a lot easier for new ford F150s. My only complaint is for a lack of a better word it makes a swoshing noise when lowering the tail gate.
Giving it a few days to see if it stops. Purchased from Amazon on Nov 13, 2020 and received it on Nov. 14, 2020. Before mine arrived I bought one for my grandson. I purchased it on the 14th of Nov and it was received on Nov. If the noise does not solve itself, I’ll update my rating.
AdminDeeZee2 –
Yes it will.
AdminDeeZee2 –
We do not offer a tailgate assist to fit the Avalanche.
AdminDeeZee2 –
We do not have a tailgate assist for a Dakota.
AdminDeeZee2 –
Get in touch with customer service for assistance. 800-779-2102
AdminDeeZee2 –
Tailgate assist is one per package and per application.
John Ferlito –
I have a 2013 F150, I have used this product since my truck was new in 2012. To date I have used 2 of these. I am now ordering my 3rd. This product functions as described and is very easy to install. The only reason I give it a 4 star instead of 5 is because they just don’t last long enough. The rivnut that you place in the tailgate over time becomes loose and the piston arm will begin to wobble when opening and closing the tailgate eventually popping off. Once this happens it is time to replace. I believe this can be corrected by using a slightly larger rivnut and a better installation tool. Over all I am happy with the performance of the product.
AdminDeeZee2 –
Do not offer one for a Frontier.
AdminDeeZee2 –
Not sure which vehicle you are working with, but if the truck does not have a factory installed system and the mounting points are there it should work.
AdminDeeZee2 –
Contact customer service to pinpoint which one is needed for your truck. DZ43302 is for the new 2019+ RAM 1500. There is a Classic version which would take DZ43301. 800-779-2102
AdminDeeZee2 –
Contact customer service. It may have something wrong with the metal clip that holds it onto the ball mount. 800-779-2102
AdminDeeZee2 –
Contact customer service. 800-779-2102
AdminDeeZee2 –
We do not have an application for the Dakota.
AdminDeeZee2 –
Yes. It will make the closure of the tailgate a little more because of the compression of the shock.
AdminDeeZee2 –
Get in contact with customer service for assistance. 800-779-2102
AdminDeeZee2 –
The design and concept of the tailgate assist is to lower the tailgate in safe manner. Not allowing it to slam down.
AdminDeeZee2 –
Get in contact with customer service. They will have some ideas to help with this. 800-779-2102
AdminDeeZee2 –
We do not have an application for the Dakota.
DB (verified owner) –
Works as advertised, easy install with included tool. Price is very affordable. Happy with my purchase.
DaBump –
Installed without issue, however the 5mm allen wrench is not in everybodies tool box. Works as expected, seems well made and I don’t expect any problems long term.
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
No. We do not have an application for an Avalanche.
AdminDeeZee2 –
We do not have a tailgate assist for 2008 Ranger. All current applications are vehicle specific.
AdminDeeZee2 –
We do not have available for the Colorado.
AdminDeeZee2 –
We do not have an application for the Avalanche.
AdminDeeZee2 –
Contact our customer service for assistance in getting the part. 800-779-2102
AdminDeeZee2 –
At this time we do not have a tailgate assist for the Colorado.
AdminDeeZee2 –
DZ43301 is the part number you would need.
AdminDeeZee2 –
We do not have a tailgate assist for the Frontier.
Mike –
Installed on 2012 F250 in less than 30 min. Makes lowering the tailgate so simple and much safer, especially when you have stuff in your hands. Wish I had installed this years ago.
AdminDeeZee2 –
Do not have one for a Nissan Frontier.
AdminDeeZee2 –
Please get in contact with our customer service. They will be able to assist you. 800-779-2102
AdminDeeZee2 –
Contact customer service for assistance in getting a replacement clip. 800-779-2102
AdminDeeZee2 –
On some applications it is used on the threads of the ball mount as it is mounted.
AdminDeeZee2 –
Get in contact with our customer service. They will be able to assist you. 800-779-2102
M –
Bought one, for my truck love it, installed in 30 min, so bought another for my brother, he screwed up the nutsert, called deezee the said no problem sent a whole hardware pack for free. BAM! cant beat it. Great product thats why im ordering 2 more for my brothers and my new trucks.
AdminDeeZee2 –
Please get in touch with our customer service. Not sure what part number and vehicle you are trying to put this on. 800-779-2102
AdminDeeZee2 –
Give a call to our customer service and they will be able to assist. 800-779-2102
AdminDeeZee2 –
Contact our customer service for assistance in getting the replacement parts. 800-779-2102
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
Contact our customer service for assistance in getting the parts. 800-779-2102
AdminDeeZee2 –
Using a flat head screw driver there is a flat spot on the opposite side of where it clips on the ball mount. Carefully place the flat screw driver under and pry enough to release the shock.
AdminDeeZee2 –
It would be DZ43301. DZ43302 is for the new 2019 RAM.
AdminDeeZee2 –
DZ43203 fits 99-16 F350.
AdminDeeZee2 –
It will work with other trim packages. Information we received for the Silverados was that all but the WT level had the factory tailgate assist. If a specific truck did not or does not have one, ours will work.
AdminDeeZee2 –
Contact customer service for assistance on getting this part. 800-779-2102
AdminDeeZee2 –
We do not have a part number that will fit a 92 RAM.
AdminDeeZee2 –
Tailgate assists are for lowering assistance only.
AdminDeeZee2 –
It will work. We are based out of Iowa and we can get those temperatures also. The colder it is the slower the shock moves. We do not recommend forcing it down in the cold weather. It will damage it.
AdminDeeZee2 –
There s a new part number for the 2019 1500 RAM. DZ43302.
AdminDeeZee2 –
Contact our customer service for assistance. 800-779-2102
AdminDeeZee2 –
Get in contact with our customer service for further assistance. 800-779-2102
Nathan Swain –
First time owner of the DeeZee tailgate assist. I purchased one for my 2013 Ford F-150 XLT. The directions that came with the kit were clear and precise and included detailed pictures. Had my tailgate assist installed in less than 30 minutes. When I closed the tailgate and opened it for the first time after installing, I was thrilled at the way it worked. Pull the latch and just turn loose and the tailgate gently lowered and opened fully. I closed it several times in a row after this and got the same results each time. Great product and happy to have it on my truck. Already told a buddy about it. Thank you DeeZee plus thanks for it being offered at a fair price.
AdminDeeZee2 –
DZ43200 will work on the Raptor model F150.
AdminDeeZee2 –
Give a call to customer service. 800-779-2102
AdminDeeZee2 –
Contact customer service for assistance on this part. 800-779-2102
AdminDeeZee2 –
DZ43200 will work on the 2008 F150 supercrew. The previous generation before 2004 supercrew will not work. There is no hole in the tailgate for installing.
AdminDeeZee2 –
The tailgate assist does not work on the Avalanche.
AdminDeeZee2 –
Please get in contact with customer service for a replacement. However the tailgate assist only works on the driver side. When installed on the passenger side with the slot in the hinge to remove the tailgate, the tailgate assist pulls the tailgate out of the hinge and causes the tailgate to bind up and not lower all the way down. Customer service number is 800-779-2102.
AdminDeeZee2 –
Use a flat head scredriver on the back side of the head of the shock and carefully pry the spring clip up enough to remove the shock.
Brett –
It works great I have had it on for about five months and the tail gate ball joint broke off in my truck how do I go about getting another
Alex –
Had a problem with the tailgate assist shock, revived a replacement shock and hardware in the mail under warranty in a timely manner. Very happy with the product and even happier with the customer service. These guys rock and I’ll buy more deezee products in the future because of the great service. Thanks again Jake!
AdminDeeZee2 –
DZ43203 will not work on a stepside/flareside due to the hole used to install the assist on the tailgate is not there on those model trucks. This includes the Harley Edition F150.
AdminDeeZee2 –
There are mounting points on the passenger side but when installed the tailgate gets bound up. Because of the hinge point of where the tailgate can be removed the assist wants to pull the tailgate out of the slot.
AdminDeeZee2 –
Contact customer service for a replacement install kit. 800-779-2102
AdminDeeZee2 –
Get in contact with our customer service. 800-779-2102
AdminDeeZee2 –
Unfortunately the shock by itself is not available. They come into our warehouse completely packaged.
Grady Syx –
Works great on 2018 Chevrolet Silverado 2500 HD WT 4×4
AdminDeeZee2 –
No. There is differences in the way the two models mount and the hardware used.
AdminDeeZee2 –
We are in the process of getting a kit for the 2019 RAM 1500. It should be available sometime in March.
AdminDeeZee2 –
It will not take just a bracket for this to fit. The shocks are different per application. You can call customer service for more assistance. 800-779-2102
AdminDeeZee2 –
Do not offer a tailgate assist for the Tacoma.
AdminDeeZee2 –
It will work if the factory assist is not on the truck and the mounting locations are there for installation.
AdminDeeZee2 –
Each tailgate assist is vehicle specific. You can review the instructions for your application to see what the mounting will be.
AdminDeeZee2 –
It will fit any model Silverado that does not have the factory installed assist.
AdminDeeZee2 –
Between 2001 and 2002 is a model change. For Dodge it changed from second generation to third generation. What we have found is when they do these changes the locations we have product mounted to disappears or is no longer there. At this point I do not know what the difference is but 2002 is the first year for fitment on the 1500.
AdminDeeZee2 –
We unfortunately do not have any for an 01 Dakota any longer.
AdminDeeZee2 –
We do not have any information on the paint ability of the tailgate assist brackets.
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
Not sure which Tailgate assist you are referring to. Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
Yes it will fit the Raptor.
AdminDeeZee2 –
Do not have a different model. Contact customer service for assistance. 800-779-2102
R. Clay Cannon –
Great product. My wife is 5’ tall and my 350 super duty tailgate with the step is too heavy. This makes it easy for her. Easy, idiot proof install. Took all of 15 minutes including breaks to sip on my Coke!
AdminDeeZee2 –
Just one tailgate assist is necessary to work properly.
AdminDeeZee2 –
DZ43301 is the correct number for your vehicle.
AdminDeeZee2 –
Contact customer service with the part number you are looking for the information on. 800-779-2102
AdminDeeZee2 –
The issue you will run into is that the passenger side is where the slot is that allows the tailgate to be removed. When installed the tailgate assist will try to pull the tailgate out of the slot when it gets there and will cause a bind for the tailgate in coming down.
AdminDeeZee2 –
We do not have one available for the Frontier.
AdminDeeZee2 –
We do not offer a tailgate assist for a Suburban.
AdminDeeZee2 –
We do not have one yet available for the 19 Ranger. We are working on one and current time frame for availability is March 2020.
AdminDeeZee2 –
DZ43205 will be the part number for F350 SXT.
AdminDeeZee2 –
Get in contact with our customer service for assistance. 800-779-2102
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
It does work on the tailgates with the step. It will travel a little faster because of the additional weight. We do not recommend installing one on the other side. The assist will pull the tailgate out of the slot for removal of the tailgate and get bound up.
AdminDeeZee2 –
No. The tailgate assists are designed to be installed on the driver side. Only one per vehicle is needed.
AdminDeeZee2 –
Get in touch with customer service for assistance. 800-779-2102
AdminDeeZee2 –
Yes it will work on 2019 F150 Sport.
AdminDeeZee2 –
Get in contact with customer service for assistance. 800-779-2102
AdminDeeZee2 –
We do have replacements. Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
We do not offer a lift assist. Ours is designed for lowering only.
AdminDeeZee2 –
Contact our customer service department for assistance. 800-779-2102
AdminDeeZee2 –
Contact our customer service. They should have information on how to do this. 800-779-2102
AdminDeeZee2 –
DZ43200 would be the part number to fit 01-14 F150.
AdminDeeZee2 –
DZ43204 will work on the Raptor.
AdminDeeZee2 –
We do not have it for a Frontier.
AdminDeeZee2 –
It will work on the Power Wagon with the Ram boxes. I am not sure if there is any interference with the bed extender. I suggest review the instructions for mounting points compared to the extender.
Rodney –
GREAT product. Watch install video…written instructions suck.
AdminDeeZee2 –
Contact our customer service for assistance for the hardware. 800-779-2102
AdminDeeZee2 –
The rate of fall is already preset with no adjustment.
AdminDeeZee2 –
Using a flat head screwdriver on the backside of the shock head is a flat spot that you carefully spread the spring clip to remove the shock. Be careful not to go too far or the clip may come out or break.
AdminDeeZee2 –
We are working on it now and should be available this summer.
AdminDeeZee2 –
Yes. Contact our customer service department for assistance. 800-779-2102
AdminDeeZee2 –
We do not recommend it. When installed on the passenger side the slot is in the hinge to remove the tailgate and when tailgate gets to that point it wants to slide out and binds om that location potentially damaging things.
AdminDeeZee2 –
No. It is not designed to support the tailgate or anything placed on it. It is to lower the tailgate safely.
AdminDeeZee2 –
We do not have just the ball stud available. We do offer the complete installation kit. Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
The location for the tailgate assist for the Rebel model is the same as the standard RAM. DZ43301 should fit.
AdminDeeZee2 –
Yes. Part number is DZ43302.
AdminDeeZee2 –
It does not fit on an Avalanche.
AdminDeeZee2 –
DZ43301 will work on the Rebel trim package.
AdminDeeZee2 –
At this time we have steps and bedmats available.
AdminDeeZee2 –
Unfortunately we do not have one that will go back for fitment of a 95 F250.
Bill –
I am not a mechanic, but decided to buy one and install myself. Was extremely easy to do and really works great…
Just wish you had a unit for my son’s 2019 Ranger…
AdminDeeZee2 –
We do not have the tailgate assist for the Tundra.
AdminDeeZee2 –
DZ43301 is the application part number for a 2019 RAM Classic.
AdminDeeZee2 –
There is no way to adjust the shocks pressure. If it is not working properly contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
We unfortunately do not offer the shock by itself.
AdminDeeZee2 –
No. We do not have an application for the Avalanche.
AdminDeeZee2 –
The tailgate assist is not designed to assist in lifting the tailgate, only to control the lower.
AdminDeeZee2 –
It is currently in the testing. Right now the time frame to market is unfortunately near the end of the year.
AdminDeeZee2 –
We do not have an application for the Avalanche.
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
Yes. It is currently in design and testing stages. They will be available near the end of 2019.
AdminDeeZee2 –
Yes. Get in contact with Customer Service for assistance. 800-779-2102
AdminDeeZee2 –
Unfortunately we do not have a tailgate assist available for a 96 F-150.
AdminDeeZee2 –
Model DZ43203 is the part number.
AdminDeeZee2 –
No. The hole for installation on the tailgate is missing on those trucks.
AdminDeeZee (verified owner) –
You can remove the install bolt from the nutsert and add some of the blue lock tight to the threads of the bolt. Reinsert the bolt into the nutsert and let it dry for an hour to hour and half. This will hold the nutsert stationary until it is able to expand. The lock tight is not permanent so once the nutsert has expanded, the bolt will still break free to be removed. You find alternate suggestions on the FAQs page of the instruction sheet.
JoshWI –
Other than the ball that mounts on the tailgate, this product is AWESOME! Locktite didn’t keep the ball from unthreading. A quick call to customer service and they are sending a hardware kit.
AdminDeeZee2 –
Give a call to customer service and explain all the options you have attempted. See if they have other suggestions. 800-779-2102.
AdminDeeZee2 –
DZ43100 is for a 99-07 silverado.
AdminDeeZee2 –
DZ43102 should be the correct application. I suggest to review the instructions to make sure the installation points are there on the 3500 Dually.
AdminDeeZee2 –
It should fit. It will just be the application of an older Ford. Which should be previous generation F150. DZ43200.
AdminDeeZee2 –
Contact customer service for a replacement. 800-779-2102.
dgeitner –
The product itself works as described. I had the compression nut issue described in earlier reviews. An earlier mention of the loctite solution in the installation instructions would be beneficial.
Dave –
Love the tailgate assist on my 2016 Ram Rebel. The nursery breaking 10 months in… Not so much. However spoke with Kayla in customer service who was extremely helpful in getting the replacement parts sent out as quickly as possible. Great service Dee Zee and Kayla will definitely purchase more Dee Zee products in the future.
AdminDeeZee2 –
Yes it will work on the Raptor. DZ43200.
AdminDeeZee2 –
DZ43301 will 15 Ram.
AdminDeeZee2 –
DZ43301.
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102.
AdminDeeZee2 –
Contact customer service 800-779-2102.
AdminDeeZee2 –
No. The supercrew has a different tailgate and the hole for installation on the tailgate is not there.
AdminDeeZee2 –
Tailgate assist DZ43301 is the part number for a 17 Ram 1500.
AdminDeeZee2 –
Please contact customer service for assistance on this.
AdminDeeZee2 –
Call customer service at 800-779-2102.
AdminDeeZee2 –
We don’t have a part number for that year.
AdminDeeZee2 –
It will work on that model. At this time we have not had a Dodge model that it hasn’t fit on.
AdminDeeZee2 –
Please fill out the contact us form and attached any images you might have for customer service to review and get back in touch with you.
AdminDeeZee2 –
DZ43205 is the number for the new 17 SuperDuty.
AdminDeeZee2 –
You can contact customer service for a replacement. 800-779-2102.
AdminDeeZee2 –
We do not have one with those dimensions.
AdminDeeZee2 –
No at this time there is no part number for this application.
AdminDeeZee2 –
DZ43200 will be the part number for this application.
AdminDeeZee2 –
There are no plans for a Tailgate assist for 03 Tundra. I do not know of one on the market.
AdminDeeZee2 –
At this time we don’t have an available option for the Tahoe.
AdminDeeZee2 –
Contact customer service for help in getting that piece. 800-779-2102.
Rod Whitlow –
Great product, took 15 min to install, works great! So easy even a caveman can do it.
AdminDeeZee2 –
Contact customer service 800-779-2102. They will be able to assist you with this.
AdminDeeZee2 –
Contact customer service and they will be able to resolve this issue for you. 800-779-2102.
AdminDeeZee2 –
Unless you install a lock on the passenger side the assist will work properly. As the tailgate falls the slot used to remove the tailgate will cause the tg to try and slide out and cause a binding issue.
AdminDeeZee2 –
DZ43102.
AdminDeeZee2 –
At this time we have not had a chance to test fit one on the 17 Raptor.
AdminDeeZee2 –
DZ43204 will fit 15-17 F150.
AdminDeeZee2 –
You can contact customer service and they will be able to assist you with getting a replacement. 800-779-2102.
AdminDeeZee2 –
Do not have one for the Tundra at this time.
AdminDeeZee2 –
DZ43301 will fit. The Mega cab designation will not matter on the tailgate assist fitment.
AdminDeeZee2 –
Unfortunately we don’t have a Tailgate Assist for a 93 GM truck. First year is 99.
AdminDeeZee2 –
At this time we do not have an application for the Frontier.
Frank –
Only issue with the install was the blind nut kept turning in the tailgate when trying to tighten. Simple solution was to hold the inner washer with a thin set of vise grips. Entire install took 15 minutes. Works perfect. Truck should have come from the factory with this.
AdminDeeZee2 –
We do not have any type of that product.
AdminDeeZee2 –
Unfortunately there is no adjustment on the shock.
AdminDeeZee2 –
DZ43301 is the part number you are looking for.
AdminDeeZee2 –
At this time there is not an application. There has been some discussion about the vehicle. This will be an item might export.
AdminDeeZee2 –
Yes the DZ43301 will fit the Rebel.
AdminDeeZee2 –
The shocks themselves are not adjustable.
AdminDeeZee2 –
Using a 7/16″ drill bit will take the flange of the nutsert off for it to be removed.
AdminDeeZee2 –
Do not have one that will fit back to a 97.
AdminDeeZee2 –
Tailgate assists weigh 1 lb. for shipping.
AdminDeeZee2 –
Get in contact with customer service for help with this matter. 800-779-2102.
AdminDeeZee2 –
We have the complete install kit available for purchase. It is all parts minus the shock. Call customer service. 800-779-2102.
AdminDeeZee2 –
Please contact customer service for help with this situation. 800-779-2102.
AdminDeeZee2 –
Part number DZ43301 will fit Dodge models except the ram box.
AdminDeeZee2 –
No. It is a different part number. DZ43301.
AdminDeeZee2 –
We have all instructions available on the website. Hit the link in the upper left corner of our website and follow the steps from there to get a copy.
Curt Webb –
The quality of the product is fine. Installing the nutsert was the problem. Following the instructions, I was not able to successfully do the install. Holding the allen wrench and turning the nut with the open end wrench simply backed the bolt out of the nutsert. Trying the two “helpful” suggestions didn’t work. Finally, I went to YouTube and found the proper way to do the install. You guys might want to check it out. Thanks.
AdminDeeZee2 –
You can contact customer service for replacement parts. We have an install kit available. Basically all parts but the shock. 800-779-2102.
AdminDeeZee2 –
DZ43100 fits the 99-07 Chevy.
AdminDeeZee2 –
The DZ43200 is not for a F-350 truck it is for a F-150 04-14. DZ43203 is for 99-16 and DZ43205 is for 17. Please verify the part number and vehicle.
AdminDeeZee2 –
Contact customer service for assistance on a replacement. 800-779-2102.
AdminDeeZee2 –
Get in contact with the place of purchase for a warranty. If you run into any issues with them please call customer service. 800-779-2102.
Daniel –
Very easy and quick to install. Every truck should have this system
AdminDeeZee2 –
Contact customer service for assistance in getting a new one, 800-779-2102.
AdminDeeZee2 –
You can use a 7/16″ drill bit to remove the old nutsert. We don’t recommend installing on the passenger side. When the tailgate is lowered the hinge where the tailgate has the ability to be removed will catch and the tailgate will get bound up and not continue down.
AdminDeeZee2 –
The differences is that they are for two different year range of Fords. DZ43203 is for 97-03 F150/99-16 SuperDuty and DZ43204 is for 15-17 F150. They mount differently.
AdminDeeZee2 –
There may be some slight sound when the shock is in use. It shouldn’t be a lot. You can go to our contact us part of the website and attach a short video and our customer service can get in touch with you on the issue.
AdminDeeZee2 –
You can contact customer service to get a replacement part. 800-779-2102.
AdminDeeZee2 –
The tailgate assist for 17 Ram is available now. Part number is DZ43301.
AdminDeeZee2 –
Contact customer service for assistance on a replacement. 800-779-2102.
AdminDeeZee2 –
We do not have a tailgate assist for the Frontier.
AdminDeeZee2 –
The design of the tailgate assist is for the tailgate itself along with the factory cables.
AdminDeeZee2 –
Tailgate assist will fit the Rebel with the ram box.
AdminDeeZee2 –
You can take the blue locktite liquid to help install the nutsert. Remove the install bolt from the nutsert and add some to the threads. Reinsert the bolt to the nutsert and let sit at least an hour. This will hold the nutsert stationary long enough for it to begin to expand. The locktite is not permanent so when the installation is complete it will break lose for removal of the bolt.
AdminDeeZee2 –
Yes it will.
AdminDeeZee2 –
Get in contact with customer service for assistance on this issue. 800-779-2102.
AdminDeeZee2 –
DZ43301 is the part number for fitment on a 2017 Ram.
AdminDeeZee2 –
Contact customer service for a replacement nutsert. 800-779-2102.
AdminDeeZee2 –
At this time there is no Tacoma application for the tailgate assist.
AdminDeeZee2 –
Contact customer service for assistance on this issue. 800-779-2102.
AdminDeeZee2 –
The torque is mainly to make sure the nutsert doesn’t get over tightened. The upper ball mount does not need to be torqued. The instructions are only for the tailgate ball mount.
AdminDeeZee2 –
There is not a different size that can be sent out. It can be installed on the passenger side, but you will need a tailgate lock so that the tailgate will not try to come out. The ability to remove the tailgate slot is on the passenger side.
AdminDeeZee2 –
Contact customer service for assistance in getting a replacement. 800-779-2102.
AdminDeeZee2 –
There is a flat spot on the back side of the shock head that a flat head screwdriver can be put under. Carefully lift that clip up and the head of the shock will be able to come off.
AdminDeeZee2 –
We don’t offer the tailgate assist for the smaller trucks such as the Colorado.
AdminDeeZee2 –
We don’t have an application for the Dakota.
AdminDeeZee2 –
Not sure what vehicle application you are looking for.
AdminDeeZee2 –
DZ43301 will fit the rebel.
AdminDeeZee2 –
At this time there is no tailgate assist for the Dakota.
AdminDeeZee2 –
Contact customer service for assistance in getting a replacement. 800-779-2102.
AdminDeeZee2 –
DZ43200 will fit on the Raptor.
AdminDeeZee2 –
The lock tight is for installation of the ball mount into the nutsert.
AdminDeeZee2 –
Please call customer service for help with this issue. 800-779-2102.
AdminDeeZee2 –
Please contact customer service for help in your question. 800-779-2102.
AdminDeeZee2 –
Yes it will work on the 3500 Laramie.
AdminDeeZee2 –
Contact customer service for assistance on replacement parts. 800-779-2102.
AdminDeeZee2 –
Dee Zee no longer has a tailgate assist for the Tacoma.
AdminDeeZee2 –
There is not an application that goes back that far.
AdminDeeZee2 –
Dee Zee is unaware of any differences in the tailgates of the regular Ram and the Ram box. Tailgate assist will work.
AdminDeeZee2 –
The tailgate assist is designed to have the resistance in going down. When closing the tailgate it will just be the tailgate.
AdminDeeZee2 –
We do not have a tailgate assist for S10 trucks.
AdminDeeZee2 –
The tailgate assist is for reduce the speed of the tailgate coming down. It does not assist in going up.
Gary Mazzei –
I think I stripped out the Nutsert.Is their anyway to remove it.My Truck is a 2009 Chevy Silverado.Also can I purchase a new Nustsert?
AdminDeeZee2 –
Unfortunately there is not an application for the Colorado.
AdminDeeZee2 –
We are in the process of getting one for the 17 Ford SD. They should be available for shipping early February. Part number is DZ43205.
AdminDeeZee2 –
There are no issues with installation of the Tailgate Assist on an 11 F-150 Ecoboost.
AdminDeeZee2 –
Contact customer service for assistance to resolve this issue. 800-779-2102.
AdminDeeZee2 –
Remove the install bolt from the nutsert. Apply a small dab of the blue locktite to the end of the threads. Reinstall the bolt into the nutsert and let dry for about 1 hour. After installing nutsert, the bolt will come out. The locktite is not permanent.
AdminDeeZee2 –
Contact customer service and they will be able to get one sent to you.
AdminDeeZee2 –
Contact customer service and they will be able to get a replacement install kit out. 800-779-2102.
AdminDeeZee2 –
Using a 7/16″ drill bit will take the flange part of the nutsert off. You will have to retrieve the other part from inside the tailgate. Contact customer service to get a replacement. 800-779-2102.
AdminDeeZee2 –
We don’t have tailgate assist for the Tundra at this time.
AdminDeeZee2 –
DZ43203 will fit a 2016 SuperDuty.
AdminDeeZee2 –
No. DZ43200 is for 04-14 F150. You need DZ43203 for an F350.
AdminDeeZee2 –
Yes. Contact customer service for assistance on getting this. 800-779-2102.
AdminDeeZee2 –
Contact customer service for assistance in getting a replacement. 800-779-2102.
AdminDeeZee2 –
Contact customer service for assistance on a replacement. 800-779-2102.
AdminDeeZee2 –
DZ43200 will fit 04-14 F150 standard bed.
AdminDeeZee2 –
We have not had that much contact in regards to this issue. We do run into this issue here at the company headquarters. I will forward the statement on to our R&D department to look into this.
AdminDeeZee2 –
Part number for 2016 Ford SD is DZ43203.
AdminDeeZee2 –
DZ43204 is for 15-16 F150.
AdminDeeZee2 –
From your information it sounds defective. Get in contact with your place of purchase for a replacement.
AdminDeeZee2 –
Please contact customer service at 800-779-2102.
AdminDeeZee (verified owner) –
The Tailgate Assist is designed for the diver’s side only.
AdminDeeZee (verified owner) –
Visit our Preferred Dealer link to find a local dealer, retail chain, or online option for ordering.
AdminDeeZee (verified owner) –
Yes. Contact customer service at 1-800-779-2102. We have the complete hardware bag available for $9.00 and can be ordered by MC or Visa. This includes all hardware pieces minus the shock.
AdminDeeZee (verified owner) –
The DZ43101 had a longer shock due to different mounting location. The DZ43102 now has 2 ball mount plates that are used for installing the product. The ball mount plates bring the shock mounting position further down resulting in a shorter shock. DZ43102 replaced the DZ43101 to accommodate for the new style truck.
AdminJeff De Vries –
Please contact customer service and they will be able to further assist you with this issue. 1-800-779-2102.
AdminJeff De Vries –
A complete installation kit for the tailgate assists can be purchased. This can be done by contacting customer service. 1-800-779-2102.
AdminDeeZee2 –
At this time we will not be making a Tailgate assist for a 2001 Dodge.
AdminDeeZee2 –
Please contact customer service and they will be able to help you with getting a replacement. 800-779-2102.
AdminDeeZee2 –
Part number is DZ43100.
AdminDeeZee2 –
Contact customer will be able to help you with this situation. 800-779-2102.
AdminDeeZee2 –
Contact customer service at 800-779-2102 for help with the tailgate assist.
AdminDeeZee2 –
DZ43200 will fit on a 04-14 F-150. Will not fit Flareside bed.
AdminDeeZee2 –
You can contact customer service. 800-779-2102.
AdminDeeZee2 –
No it will not.
AdminDeeZee2 –
No. It is for a standard bed.
AdminDeeZee2 –
Dee Zee does not have a Tailgate Assist to fit a 99 Dodge Ram. First year of fitment is 2002.
Paul D Smith –
I have purchased 6 of these tailgate assists. They are a godsend for my wife. She is only 5’tall and some of my trucks were to tall for her to operate the tailgates safely.
Now she can lower them without worrying about the weight dropping on her and possibly injuring her. Several of my friends watched mine operate and immediately purchased them for their trucks. A great safety product!!!! I would recommend them to everyone! Good job DeeZee!!!!!
Steve (verified owner) –
Works great, was easy to install. Highly recommend!
Brian Buckner –
Just got done installing it. About 25 minutes and done. I installed because my son always dropped my tailgate. After completing install, had son drop tailgate and he thought it was cool and doesn’t have to worry about dad chewing his butt. Thanks again for an excellent product, and a happy popa.
AdminDeeZee2 –
Part number is DZ43200.
AdminDeeZee2 –
DZ43203 fits 99-16 Ford SD.
AdminDeeZee2 –
Should fit. Not aware of any differences in the tailgates.
AdminDeeZee2 –
Contact our customer service department and they will assist you in getting the replacement parts. 800-779-2102.
AdminDeeZee2 –
Yes. The DZ43203 will fit both vehicles for the year ranges.
AdminDeeZee2 –
It will not fit the lightning. They have a similar bed to the Supercrews.
AdminDeeZee2 –
Yes the DZ43301 will fit on a 2016 Ram Big Horn.
AdminDeeZee2 –
Yes. Part number DZ43200 will fit the FX4 package.
AdminDeeZee2 –
We don’t have just the shocks available for replacement. Our first introduction of these was in 2007 and we have made changes to them since then. So any replacement parts that we currently have would not work on that old of a model.
AdminDeeZee2 –
Yes. DZ43301 will fit this application.
AdminDeeZee2 –
Yes.
AdminDeeZee2 –
Contact customer service. 800-779-2102.
AdminDeeZee2 –
Contact customer service for a replacement spring clip. 800-779-2102.
AdminDeeZee2 –
At this time we don’t offer a Tailgate Assist for a Tundra.
AdminDeeZee2 –
We don’t currently have Tailgate Assist for the Tundra.
AdminDeeZee2 –
It will fall a little faster with the step than without. Still works good.
AdminDeeZee2 –
No it will not. They are different.
AdminDeeZee2 –
Please contact customer service and they will be able to help you get that replaced. 800-779-2102.
AdminDeeZee2 –
All prices are in US funds on our site.
AdminDeeZee2 –
Contact customer service for a new installation kit. 800-779-2102.
AdminDeeZee2 –
Yes. Contact customer service for assistance in getting a replacement. 800-779-2102.
AdminDeeZee2 –
No. the stepside truck beds are different.
AdminDeeZee2 –
DZ43203 is for the 99-16 SuperDuty.
AdminDeeZee2 –
The only way to remove it is drill it out with a 7/16″ drill bit. You can contact customer service for a replacement. 800-779-2102.
AdminDeeZee2 –
We do not have an application for the SportTrac.
AdminDeeZee2 –
The part number is DZ43205. It will be available end of February.
AdminDeeZee2 –
At this time we don’t have one available for a Colorado.
AdminDeeZee2 –
DZ43205 is the part number for the 17 Ford SD. It will be available the end of February to first of March.
AdminDeeZee2 –
7/16″ drill bit will take the flange off the nutsert.
AdminDeeZee2 –
Contact customer service for help in this matter. 800-779-2102.
AdminDeeZee2 –
You can contact customer service for assistance getting a replacement. 800-779-2102.
AdminDeeZee2 –
They are two different applications. Get in contact with the place of purchase to get the correct one.
AdminDeeZee2 –
We do not have the tailgate assist for the Avalanche.
WARREN BUTCH –
GREAT COMPANY THANK YOU VERY MUCH. NEEDED REPLACEMENT HARDWARE. AND SURPRISE TO ME IN THE MAIL BOX. DEFINITELY A FIVE STAR.
I WILL BE SPENDING MORE TODAY.
THANKS GOING SHOPPING RIGHT NOW.
AdminDeeZee2 –
Contact customer service and they will be able to assist you. 800-779-2102.
AdminDeeZee2 –
The DZ43300 is only for 02-08 Ram. For the 2016 it is DZ43301.
AdminDeeZee2 –
We do either paint the part or is made from galvanize materials for rust resistant.
AdminDeeZee2 –
From the information that we have received and reviewed there is not difference in tailgates on Dodge model trucks. DZ43301 should work on the truck.
AdminDeeZee2 –
There will be some resistance when closing the tailgate as the shock has to reset itself for the next time the tailgate is lowered.
AdminDeeZee2 –
We have looked into other applications but there hasn’t been enough information gathered on the vehicle for this product.
AdminDeeZee2 –
It can only be used on the passenger side if there is a keeper on the hinge point. Otherwise the tailgate will get bound because of the slot that allows the tailgate to be removed.
AdminDeeZee2 –
There are some models the tailgate assist will not fit because the tailgates are different. Will not fit the SuperCrew, Flareside beds, and Harley Edition (these trucks are all SuperCrews). Ford didn’t put the hole location that we use for installment on these models.
AdminDeeZee2 –
To remove the nutsert. Use a 7/16″ drill bit to remove the flange off of it for removal.
AdminDeeZee2 –
We are unaware of a steel version of the nutsert. Contact customer service and they will be able to supply you with a new one. 800-779-2102.
AdminDeeZee2 –
Use a flat head screw driver on the backside of the shock where it is mounted to the ball mount. Pry it up carefully so the prongs will spread far enough apart for it to come off. Any further assistance contact customer service. 800-779-2102.
Ron L –
best investment i’ve made for my Superduty
AdminDeeZee2 –
The nutsert will have to be replaced. Contact customer service for a replacement 800-779-2102. To remove the old one, use a 7/16″ drill bit to drill the flange of the nutsert off.
AdminDeeZee2 –
There is a flat spot on the backside of the shock head that a flat head screwdriver can be put under. Carefully pry up and the spring clip will expand enough for the shock to come off.
AdminDeeZee2 –
They are not interchangeable. The DZ43204 uses a plate on the side of the tailgate for installation. The DZ43200 uses a nutsert for installation to the tailgate.
AdminDeeZee2 –
Unfortunately the nutsert that gets installed in the tailgate is different size between the two. The DZ43203 uses a larger nutsert. Contact the place of purchase and even though it has bee opened it is the wrong application.
AdminDeeZee2 –
We are not aware of anyone that has tried to drill their own hole. No one has contacted us if they have tried this.
AdminDeeZee2 –
There is a flat spot on the backside of the shock head that a flat head screwdriver can be put under. Carefully pry up and the spring clip will expand enough for the shock to come off.
AdminDeeZee2 –
The nutsert is bigger for the F250. The pieces at the top might are similar and might work but can’t confirm that.
Mike –
I purchased one for my 2017 Dodge Ram after having a baby and going in and out of the tailgate one handed this product makes it much easier while have child carrier in one hand. I even purchased one for my father for father’s day for his dodge ram.
AdminDeeZee2 –
Contact customer service and they will get that sent. 800-779-2102
AdminDeeZee2 –
DZ43301 would fit a 2017 RAM.
AdminDeeZee2 –
DZ43301 will fit.
AdminDeeZee2 –
DZ43204 will fit the 2018.
AdminDeeZee2 –
Yes it will. DZ43204 is the part number.
AdminDeeZee2 –
DZ43301 will work for the 2018 RAM.
AdminDeeZee2 –
DZ43204 is for the 2015+ F150.
AdminDeeZee2 –
The passenger side is where the slot for tailgate removal is located. When installed on that side it the tailgate wants to come out of the slot. The tailgate then gets bound and could cause damage.
AdminDeeZee2 –
We do not have one available.
AdminDeeZee2 –
There is no tailgate assist for the Sport Trac.
AdminDeeZee2 –
We do not have a tailgate assist for the frontier.
AdminDeeZee2 –
The issue you will run into is that the slot for the tailgate to be removed is on the passenger side. When the tailgate assist is installed on that side then it is opened the tailgate will get pulled out of that slot and the tailgate gets bound up and can damage the hinge point.
AdminDeeZee2 –
DZ43204 will work on the 18 F150. It is designed for the drivers side. With the way this part number installs, you will not have to worry about the friction of paint wear,
AdminDeeZee2 –
DZ43100 would be the correct part number.
AdminDeeZee2 –
DZ43100 is the part number needed. It fits 99-07. I believe the 2007 2500HD didn’t change body style until 2008.
AdminDeeZee2 –
Call customer service for a replacement. 800-779-2102
AdminDeeZee2 –
DZ43205 is the part number for 17+ Super Duty.
AdminDeeZee2 –
Yes. A replacement installation kit is BKT 43203.
AdminDeeZee2 –
DZ43301 is the part number for 16 RAM.
AdminDeeZee2 –
DZ43301 will work for your 17 Big Horn Ram.
AdminDeeZee2 –
Please contact customer service for assistance. 800-779-2102.
AdminDeeZee2 –
Yes it will.
AdminDeeZee2 –
DZ43301.
AdminDeeZee2 –
DZ43301 will fit the ram box.
AdminDeeZee2 –
DZ43204 is the part number.
AdminDeeZee2 –
Contact customer service. 800-779-2102.
AdminDeeZee2 –
DZ43204 is the part number.
AdminDeeZee2 –
No. We currently have them for Chevy, Dodge, and Ford.
AdminDeeZee2 –
One will work fine and part number DZ43203 will fit your vehicle.
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
DZ43301 will fit this application.
AdminDeeZee2 –
We do not have an application for the Tundra.
AdminDeeZee2 –
DZ43200 is correct for a 2012 F150. The blind nut has to expand out in the hole. If you are running into installation questions get with customer service. 800-779-2102
Scott Nelson –
Just installed the DeeZee Tailgate Assist on my wife’s 2010 Ford F150…Wow!! It works fantastic…she can now open the tailgate with one-hand and not worry about it at all…and was very easy to install…took me about 20 minutes…so worth it!!!
AdminDeeZee2 –
DZ43200 will fit a 2004-2014 F150 standard bed. Will not fit a flareside or stepside bed.
AdminDeeZee2 –
We are not aware of any changes to the 2018 Ram. DZ43301 will fit a 2018.
AdminDeeZee2 –
DZ43204 will fit the 2017 Raptor.
AdminDeeZee2 –
DZ43100 fits 99-07 Silverado.
AdminDeeZee2 –
We do not have tailgate assist for the Ridgeline.
Jon –
Do you have a kit that would fit a 2005 Ford Ranger? I don’t mind having to customize it to fit. Thanks.
Cesar –
I have a GMC Sierra 2016 double cab which part number would I need?
AdminDeeZee2 –
DZ43301 will be the part number for a 2018 Ram.
AdminDeeZee2 –
We do not have a kit for the Ranger. Unfortunately we don’t what it would take to make it fit.
AdminDeeZee2 –
DZ43102 will be the part number.
AdminDeeZee2 –
Contact customer service at 800-779-2102.
AdminDeeZee2 –
Contact customer service 800-779-2102.
AdminDeeZee2 –
DZ43203 is the correct part number for a 2016 F250 SuperDuty.
AdminDeeZee2 –
We do not have a tailgate assist for the Avalanche.
AdminDeeZee2 –
Unfortunately we do not have one for the step side beds.
AdminDeeZee2 –
We have had some issues with this. If you need replacement parts because of this issue, customer service can send them out. 800-779-2102.
AdminDeeZee2 –
Yes DZ43301 will fit.
AdminDeeZee2 –
This can occur if the nutsert is not tightly installed in the hole. This what has caused the issue in the past. Just be sure to have the nutsert installed completely.
Michael –
I installed this liftgate damper on a 2018 GMC Sierra 2500HD today. It took me more time to find the necessary tools than it did to install the Dee Zee tailgate assist. Two critical comments – contrary to the instructions, removing the cable from the frame of the truck is much easier and different than what is depicted; this item DOES install on 2018 GMC & Chevrolet trucks.
AdminDeeZee2 –
Not sure what the issue is, but you can contact customer service for assistance. 800-779-2102.
AdminDeeZee2 –
DZ43203 is for a 97-03 F150 standard bed. It will not work on the flarside or Super Crew beds.
AdminDeeZee2 –
DZ43102 is for 07-18 Chevy/GMC and DZ43300 is for 03-09 Dodge/Ram.
AdminDeeZee2 –
DZ43102 is for 07-18 DM. DZ43100 is for 99-07. 07 classic body.
AdminDeeZee2 –
DZ43301 is for the 17 Ram.
AdminDeeZee2 –
DZ43102 would be the application part number.
AdminDeeZee2 –
We do not have a Tailgate Assist for the Ranger.
AdminDeeZee2 –
We do not have a Tailgate assist for an Avalanche.
AdminDeeZee2 –
Not sure why this is coming up too long. DZ43300 is the correct part number for the year of truck. Get in contact with the place of purchase to get a new one or contact our customer service for assistance. 800-779-2102
AdminDeeZee2 –
Unfortunately for this year range of truck the installation does not use the clip on cylinder. I understand your concern but at this time there is no different installation kit to be used.
AdminDeeZee2 –
Get in contact with the where it was purchased and get it replaced. If you need further assistance contact our customer service. 800-779-2102
AdminDeeZee2 –
DZ43301 will work on a 2018.
AdminDeeZee2 –
It will work if there is not a factory assist already on the truck.
AdminDeeZee2 –
DZ43300 will not work for a 2017. You will need DZ43301 for a 2017.
AdminDeeZee2 –
We do not have a Tailgate Assist to work on the flareside model beds. Mounting points are not there on the tailgate.
AdminDeeZee2 –
No. there is a little difference in the way it installs. DZ43301 is the correct part number.
AdminDeeZee2 –
You can get that information by calling customer service at 800-779-2102.
AdminDeeZee2 –
It will not work on the Super Crew. The tailgates for 97-03 are different when you get to the Super Crew. The mounting location on the tailgate is not there.
AdminDeeZee2 –
Yes. DZ43301 will work on a Big Horn Dually.
AdminDeeZee2 –
Do not have a tailgate assist for the Titan.
AdminDeeZee2 –
DZ43102 will fit a 2010 2500.
AdminDeeZee2 –
We do not have just the bolt. We do have a complete install kit available. Here is the link to our page with them. https://www.deezee.com/product/tailgate-assist-hardware-kit/
AdminDeeZee2 –
DZ43301 will work for this vehicle.
AdminDeeZee2 –
DZ43301 will fit on the 2018.
AdminDeeZee2 –
DZ43301 will work.
AdminDeeZee2 –
Contact customer service at 800-779-2102.
AdminDeeZee2 –
We do not have one available for the Frontier.
AdminDeeZee2 –
Do not have one available for the Ranger.
AdminDeeZee2 –
Do not have a Tailgate Assist for the Tundra.
AdminDeeZee2 –
It is all about the issue of the slot that allows the tailgate to be removed. When in operation the tailgate would get bound because the tailgate will try to come out of that slot.
AdminDeeZee2 –
It is designed to assist in lowering the tailgate not assisting the raising.
AdminDeeZee2 –
There are no corrosion issues. We have been using steel brackets with aluminum running boards since 1977 without any issue.
AdminDeeZee2 –
Tailgate assists do not work on step side beds.
AdminDeeZee2 –
It will not work on Silverados that have the factory installed assist.
AdminDeeZee2 –
DZ43301 will work for a 2014 Ram 1500 Big Horn.
AdminDeeZee2 –
DZ43200 works on 04-14 Mark LT.
AdminDeeZee2 –
Yes.
AdminDeeZee2 –
DZ43200.
AdminDeeZee2 –
Yes it will fit.
AdminDeeZee2 –
Do not have a tailgate assist for the Tacoma.
AdminDeeZee2 –
DZ43301.
AdminDeeZee2 –
We do not have a tailgate assist for the Dakota.
AdminDeeZee2 –
It can be but when in operation the assist wants to lift the tailgate off the vehicle. The passenger side is where the hinge has the opening where the tailgate can be lifted and removed from the vehicle. Then the tailgate gets bound up.
AdminDeeZee2 –
You can order replacement parts. Contact customer service for assistance on ordering and removal. 800-779-2102
AdminDeeZee2 –
Do not have one for a Nissan Frontier.
AdminDeeZee2 –
The assist will not support the full weight of the tailgate. They are not designed for weight bearing. You could install one on the passenger side but when operating it wants to pull the tailgate out of the slot that allows the tailgate to be removed.
AdminDeeZee2 –
Be sure the part number will fit the new vehicle. You can get the install kit separate. Contact customer service. 800-779-2102
AdminDeeZee2 –
No. The super crews do not have the same tailgates as the regular and super cab trucks. The mounting locations are not there for installation purposes.
AdminDeeZee2 –
DZ43301 is the part number to fit.
AdminDeeZee2 –
Use a 7/16″ drill bit to take the flange off.
AdminDeeZee2 –
Contact customer service for a replacement install kit. 800-779-2102
AdminDeeZee2 –
The shock is not available by itself. You will have to order a complete unit to get the shock.
AdminDeeZee2 –
Part number would be DZ43301.
RB –
After the kids dropped my tailgate a time or two, I decided it was time to fix that. This DeeZee kits works great! You can open the tail gate one handed and let it drop. The shock lets it drop quickly, but in a controlled manner such that it “lands soft”.
I did the install in the dark with a little light from the light on the side of the house in a 2011 F-250 Super Duty.
I did struggle with the insert nut. I held the hex key still and turned the nut with a wrench as instructed, but the insert was turning as well and threaded off the bolt. I got past it by cocking the insert nut upwards with by T-handle hex key and binding the insert nut in the hole. As I turned the nut with a wrench, the insert nut then began to tighten up in the hole, straighten itself out in the hole, and seat just fine. This alone is why I give the 4 star vs 5 star. Otherwise, a 5 star product.
The provided T-50 L Key is a little short, but a box end wrench helped me get the leverage I needed. Not one of my bit kits have a T-50 in it (all went up to T-40). Advice for others is to get a T-50 bit you can put in a 1/4″ socket on a ratchet.
I will and have recommended this kit to friends. Price is very good and performance is as expected.
Once installed, I made the wife and kids all try it out because I was so happy with it.
AdminDeeZee2 –
Sounds like the shock is defective. Contact the place of purchase to process a warranty on the defective unit.
AdminDeeZee2 –
For a SuperCrew and Harley editions the hole is not there in the tailgate. Not sure why Ford did that compared to the SuperCab and Regular cab models but they did. Not sure of how to make it work without the hole.
AdminDeeZee2 –
The nutsert is not quite expanded out enough. I suggest put the install bolt back in the nutsert and another turn or two. Then put the ball mount in to see. If see more threads on the ball mount when it hits threads it should be ready to install.
AdminDeeZee2 –
Just get in contact with customer service. 800-779-2102.
AdminDeeZee2 –
We do not have a part number available for the ranger.
AdminDeeZee2 –
First year available for a Chevy is ’99.
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
You will have to purchase a new one. Contact customer service and they will assist you with that. 800-779-2102
AdminDeeZee2 –
Unfortunately the we don’t have the shock available by itself. The shock comes in the complete kit.
AdminDeeZee2 –
Contact customer service for replacement parts. 800-779-2102
AdminDeeZee2 –
We don’t have an application for the Frontier.
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
Unfortunately it starts with 99.
AdminDeeZee2 –
Yes it will. But because of the step assist the tailgate will lower a little faster than the models without the step.
AdminDeeZee2 –
Yes. You can contact customer service for assistance. 800-779-2102.
AdminDeeZee2 –
Tailgate assist for 2012 CHevy HD is DZ43102.
AdminDeeZee2 –
Contact customer service and they will be able to get a replacement sent. 800-779-2102.
AdminDeeZee2 –
At this time there is not a part number for the T100.
AdminDeeZee2 –
You can reinsert the tool and turn another turn. Then recheck. There should not be any movement of the nutsert when installed.
AdminDeeZee2 –
DZ43200 will fit 04-14 Mark LT.
AdminDeeZee2 –
It should fit fine. There are no differences in the tailgates and cable mounts for the fender storage to regular beds.
Jerry –
The new blind nut worked out very good, on my 2016 f350. My tailgate needed 2 of the tailgate assist, tailgate heavy. Very happy
AdminDeeZee2 –
Contact customer service. 800-779-2102.
AdminDeeZee2 –
DZ43300 starts for fitment of 2002 Ram 1500.
RJ –
Installed fairly quickly on 2017 Ram 3500. Less than an hour all things involved.
Instructions were fine with exception of tools needed. Instructions called for flat blade screwdriver, pliers and torque wrench that weren’t in listed tools needed. No biggie.
Had never used nutserts / blind nuts before, worked as described. It held firm when pivot post was torqued down. No issues even with elongated tailgate hole instead of round hole as read / saw earlier in some video or instructions when researching.
Used the provided lock tight on all installed – reinstalled bolts.
When removing tailgate limiter clip used old trick with regular pliers nose to hold circular clip while turning out bolt with Torx head driver to remove cable limiter. A bit easier and safer than prying with flat blade screwdriver when removing spring clips. While had apart after removing cable limiter placed flat nylon washer in limiters place to avoid rubbing and rusting after install.
Used plier pads, could use tape, for pliers teeth so not to gouge up tailgate cable and cable clip when clamping / installing.
Popped in dampener shock as in instructions. Note: A slight pull is needed on shock to line up bottom shock grip on pivot post, it’s a tight fit getting it in place. But snugly lines right up.
Tested out after completion, aligned right, no rubbing, no problems, works fine. ( There is a slight swooshing sound as shock / dampener is working, no cause for alarm. Is typical, like a screen door closer.) Took longer to read instructions and get tools together and put back than installing tailgate assist. Would recommend to a friend.
AdminDeeZee2 –
I am sorry but we don’t have one for a Ranger.
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102.
AdminDeeZee2 –
Contact customer service to get a replacement. 800-779-2102.
AdminDeeZee2 –
Yes. You can order replacement parts. Contact customer service 800-779-2102.
AdminDeeZee2 –
Call customer service for assistance. 800-779-2102.
AdminDeeZee2 –
Yes. Contact customer service. 800-779-2102
AdminDeeZee2 –
There is a flat spot on the back side of the shock head. Place the flat head screw driver under the clip and carefully pry up and this will expand the clip enough to get it off the ball mount.
AdminDeeZee2 –
Yes. Be sure to install the nutsert towards the front of the vehicle in the hole when the tailgate is in the down position. The shock will want to pull the nutsert to that spot when in operation.
AdminDeeZee2 –
No. We don’t currently have the tailgate assist for a Ranger.
AdminDeeZee2 –
DZ43301 is for a 2017 RAM.
AdminDeeZee2 –
There has been no mention of adding an application for the Frontier at this time.
AdminDeeZee2 –
A 2012 Super Duty would use a DZ43203. DZ43200 is for a 04-14 F150. The size of shock is different.
AdminDeeZee2 –
Contact customer service for a replacement part. 800-779-2102.
AdminDeeZee2 –
That is up to you. We don’t recommend. When the shock is trying to work it will try to pull the tailgate out of the slot that allows the tailgate to be removed. This will cause the tailgate to bind up and could cause damage.
AdminDeeZee2 –
DZ43301 is the tailgate assist for 16 Ram 1500.
AdminDeeZee2 –
No. It is galvanized steel. Except the nutesert that is used in some applications.
AdminDeeZee2 –
We do not have one for year of truck.
AdminDeeZee2 –
DZ43301 will fit 14 Ram.
AdminDeeZee2 –
DZ43301 will fit 2015 Ram 1500.
AdminDeeZee2 –
Contact customer service at 800-779-2102.
AdminDeeZee2 –
DZ43301 will work on the 2010 Ram HD.
AdminDeeZee2 –
We do not have one to fit the SuperCrew. The mounting point on the tailgate is not there.
AdminDeeZee2 –
DZ43203 will be the part number for 15 F-350.
AdminDeeZee2 –
Attaching one to the passenger side of the vehicle can cause issues. That is the side where the hinge has the ability to allow the tailgate to be removed and installing a TG Assist on that side when operating may cause the tailgate to try to come out of that hinge and cause the tailgate to bind up.
AdminDeeZee2 –
Thank you for this question. I see that we are missing some information for this product and vehicle. The part number is DZ43203.
AdminDeeZee2 –
DZ43301 will fit.
AdminDeeZee2 –
DZ43301.
AdminDeeZee2 –
I have not had any confirmation on 2018 models yet. But general information is saying there is no change to the truck other than cosmetic. It will probably be the DZ43204 but just not positive yet.
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102.
AdminDeeZee2 –
DZ43200.
AdminDeeZee2 –
No. It is strictly designed for slowing it down when opening the tailgate.
AdminDeeZee2 –
Contact customer service. They can assist you with getting that. 800-779-2102
AdminDeeZee2 –
Contact customer service at 800-779-2102.
AdminDeeZee2 –
We do not have a Tailgate Assist for the Ranger.
AdminDeeZee2 –
We do not have an application for the Colorado.
AdminDeeZee2 –
What has happened is the nutsert has not expanded enough that the threads are not close enough to the hole. If you need a replacement nutsert contact customer service. 800-779-2102
AdminDeeZee2 –
You can also find the videos out on Youtube if the link on our site is not working for you.
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102.
AdminDeeZee2 –
DZ43301 is for a 09-17 Ram.
AdminDeeZee2 –
DZ43301 will fit fine.
AdminDeeZee2 –
Shipping is based on your zip code. As you begin the checking out it will calculate that for you.
AdminDeeZee2 –
We unfortunately do not have a tailgate assist for a 1992 F150.
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102
AdminDeeZee2 –
Yes it will.
AdminDeeZee2 –
Contact customer service. They will be able to assist you with that. 800-779-2102
AdminDeeZee2 –
Yes it will.
AdminDeeZee2 –
Contact customer service at 800-779-2102.
AdminDeeZee2 –
2015 to current F150 would use a part number DZ43204. It has a little different mounting system that is easier to install.
AdminDeeZee2 –
DZ43204 will be the part number for the F150 Raptor.
AdminDeeZee2 –
Contact customer service for assistance in getting replacement parts.
AdminDeeZee2 –
The issue with installing on the passenger side is when the tailgate is in operation the tailgate wants to come out of the hinge. The passenger side has the slot in the hinge that allows you to remove your tailgate. Just one will work fine.
AdminDeeZee2 –
DZ43301 will fit your 15 Ram 1500.
AdminDeeZee2 –
We unfortunately don’t have an application for that model Chevy. There is not a universal kit.