67 reviews for Rough Step Running Boards

1. AdminDeeZee – November 9, 2016

   The Rough Step boards are only available in 7” width.

2. AdminDeeZee2 – November 2, 2018

   Contact customer service for assistance. 800-779-2102

3. AdminDeeZee2 – March 5, 2019

   The rough steps are two of the same length.

4. AdminDeeZee2 – February 22, 2019

   Bracket kits begin at around $138 and go up depending on the vehicle application.

5. AdminDeeZee2 – January 22, 2019

   Do not offer wheel to wheel brite tread boards any longer.

6. AdminDeeZee2 – January 22, 2019

   Unfortunately we will not have an application for the 2009. The first year of bracket fitment is 2010 for the 2500/3500.

7. AdminDeeZee2 – January 3, 2019

   We do not have a wheel to wheel application.

8. AdminDeeZee2 – January 3, 2019

   DZ15317 will work on trucks with the DEF tank. There is specific step in the instructions for the DEF tank.

9. AdminDeeZee2 – August 22, 2018

   Unfortunately we don’t have brackets for a Jeep to fit the Rough Step. We have not seen a demand for this style of board on a Jeep.

10. AdminDeeZee2 – April 12, 2019

    We unfortunately do not custom build.

11. AdminDeeZee2 – August 10, 2018

    Once you have determined the part number of the bracket kit, you go to the upper left of our website and begin the process of getting instructions.

12. AdminDeeZee2 – August 1, 2018

    They will work if the same mounting points from a 3500 are on the 5500. Review the instructions to see if those locations are on your 5500.

13. AdminDeeZee2 – July 25, 2018

    We unfortunately do not have any wheel to wheel boards.

14. AdminDeeZee2 – June 13, 2018

    Stepping surface is 7″ wide. Height from rocker varies but the average is 2.5″.

15. AdminDeeZee2 – May 31, 2018

    The Rough Step is 7″ wide.

16. AdminDeeZee2 – May 1, 2018

    Currently we do not offer the Rough Step in that set up.

17. AdminDeeZee2 – March 19, 2019

    The Rough Step will work on a chassis cab. Just be sure to choose the correct length of board the cab you have.

18. AdminDeeZee2 – April 19, 2019

    The rough step bracket kit number is DZ15340. You will also need the DZ15311A aluminum rough step board. The steel version of the rough steps are not compatible with GM vehicles.

19. AdminDeeZee2 – February 21, 2018

    We have been informed that the metal on the Chevy truck is not working with the steel version. It would have to be the aluminum DZ15311A and DZ15315.

20. AdminDeeZee2 – February 17, 2020

    90″ is the longest that we offer for the rough steps.

21. AdminDeeZee2 – December 29, 2020

    Our rough steps are 55″, 77″, and 90″.

22. AdminDeeZee2 – December 11, 2020

    They are just cab length.

23. AdminDeeZee2 – December 1, 2020

    The biggest difference is the material. The aluminum version will be lighter.

24. AdminDeeZee2 – November 17, 2020

    We unfortunately do not have a wheel to wheel option.

25. AdminDeeZee2 – November 5, 2020

    There is a link at the upper left of our home page. Place this address in your browser and it will take you to the location to get instructions. Just enter your part number. https://www.deezee.com/instructions/

26. AdminDeeZee2 – October 29, 2020

    They will work for both fuel types.

27. AdminDeeZee2 – January 17, 2020

    It may fit but the board will come up short at the rear because of the megacab.

28. AdminDeeZee2 – May 9, 2019

    At this time we do not have any steps that would be a wheel to wheel. The longest is the crew cab applications which are 90″.

29. AdminDeeZee2 – January 17, 2020

    We do not use nylon washers.

30. AdminDeeZee2 – December 19, 2019

    Regular cab length is 55″. We unfortunately cannot answer what will be the closest fitment for a 1972 F250. We have not test fit any of the Rough Step bracket kits to that vehicle.

31. AdminDeeZee2 – September 20, 2019

    We do not have any running boards that go wheel to wheel.

32. AdminDeeZee2 – August 6, 2019

    The Rough Steps are cab length. We do not offer a wheel to wheel application.

33. AdminDeeZee2 – July 9, 2019

    Typically they are 2.5″ to 3″. Depending on the vehicle.

34. AdminDeeZee2 – June 11, 2019

    Yes. DZ15324 is the bracket kit and then choose either DZ15300A or DZ15300S depending on what material.

35. AdminDeeZee2 – May 9, 2019

    RAM applications are body mount for our running boards and tube steps.

36. AdminDeeZee2 – March 7, 2018

    We do not offer a mounting kit for a 1994 K2500 Suburban.

37. AdminDeeZee2 – February 2, 2018

    90″ is the longest model we have for a crew cab truck. We do not have any bracket kit that would mount it past the cab of the truck.

38. AdminDeeZee – November 9, 2016

    The bracket kit part number is DZ15327 and the board would be DZ15311S for steel or DZ15311A for aluminum. The vehicle lookup system will provide the numbers within the bundle listing.

39. AdminDeeZee2 – January 6, 2017

    The Rough Steps for the Dodge mounts to the rocker panel to existing holes in the body. We test fit them up to the 3500 models. If the hole locations are the same on the 5500 they will install fine. You can look at the instructions on our site before purchasing. Look for DZ15336. This is the bracket kit part number.

40. AdminDeeZee2 – January 19, 2017

    Unfortunately the first year our brackets work on the Dodges is 2009.

41. AdminDeeZee2 – January 19, 2017

    The rough steps are a good option for the 5500. There is no mudflap to interfere with factory fender flares.

42. AdminDeeZee2 – January 16, 2017

    We unfortunately would only have cab length boards.

43. AdminDeeZee2 – January 12, 2017

    We don’t have any boards that will be wheel to wheel. Just cab length. Part numbers are boards DZ15321S and brackets are DZ15327.

44. AdminDeeZee2 – January 12, 2017

    We test fit running boards up to 350 lbs. Chevy mounts to the body mounts and Ford/Dodge mount to the rocker panel.

45. AdminDeeZee2 – January 10, 2017

    Bracket kit is a DZ15327.

46. AdminDeeZee2 – January 4, 2017

    Attachment points are vehicle specific. We don’t have bracket kits that would go from one installation style to the other on the same vehicle.

47. AdminDeeZee2 – February 8, 2017

    Contact customer service for assistance on getting the mounts. 800-779-2102.

48. AdminDeeZee2 – December 21, 2016

    Boards are DZ15321S and brackets are DZ15336.

49. AdminDeeZee2 – December 7, 2016

    Dee Zee doesn’t have any bracket kit to lower the boards from what comes with the installation kits.

50. AdminDeeZee2 – November 18, 2016

    We unfortunately do not have the Rough Step running boards for an 2008 Dodge.

51. AdminDeeZee2 – November 16, 2016

    Only wheel to wheel applications would be vans.

52. AdminDeeZee2 – January 31, 2017

    DZ15321A is 90″ in length.

53. AdminDeeZee2 – March 7, 2017

    I suggest looking at the instructions for the mounting kit to see the mounting points. It may be an issue with the distance of the those locations that could cause the issue.

54. AdminDeeZee2 – January 9, 2018

    We currently only have a bracket kit that will work for the front doors only. We do carry a Brite Tread board that is full length on passenger side and door length on the drivers. Part number for that wheelbase is DZ2030.

55. AdminDeeZee2 – May 10, 2017

    The longest we have avaiable is 90″.

56. AdminDeeZee2 – October 23, 2017

    Not aware of any solutions for this. Try doing a contact us form and attach photos on our website. Someone in customer service can check into this for you.

57. AdminDeeZee2 – October 10, 2017

    The bracket kit would be DZ15326. For the board you have two options – DZ15311S is steel and DZ15311A is aluminum. Boards are 77′ long.

58. AdminDeeZee2 – September 29, 2017

    The longest section we have available is 90″. DZ15321S steel or DZ15321A.

59. AdminDeeZee2 – August 9, 2017

    We test our running boards up to 350 lbs.

60. AdminDeeZee2 – July 11, 2017

    All of our running boards are cab length only.

61. AdminDeeZee2 – March 21, 2017

    Board is DZ15321S and brackets are DZ15324.

62. AdminDeeZee2 – April 11, 2017

    Attached to the rocker panel/body of the truck.

63. AdminDeeZee2 – April 11, 2017

    The part number is DZ2055.

64. AdminDeeZee2 – April 11, 2017

    The Rough Steps are all the same length. There is not a short for drivers and long for passenger. DZ15321S or DZ15321A are 90″.

65. AdminDeeZee2 – March 28, 2017

    The biggest difference is in the weight of the product. Aluminum will of course be lighter. It is just as durable as the steel.

66. AdminDeeZee2 – March 28, 2017

    Contact customer service for assistance on this issue. 800-779-2102.

67. AdminDeeZee2 – January 21, 2021

    Most newer vehicles do not need drilling to install. You can review the instructions for your application to see how it will install.